Видео

A cheat is to just run a tooth pick down the film light seals, then use black 100% cotton yarn instead of those over priced pre cut light seals and for the mirror light seal you can use felt with a adhesive backing. when I did my Pentax Super Program and If I remember right it was 1mm wide and 30-40mm long for the mirror light seal.

I bought same srt101 from eBay and has similar mirror lock up at low shutter speed. After following your video and add oil there, initially didn’t make difference, after one day sitting, it works today. Hope it fixed. Thanks for sharing this video.

GRETA VID CUTE CAT ❤❤❤also pin me im first

The film counter is jammed. Look over the counter and see where it is sticking. If you can get it back to zero or at the next number where you can fully depress the shutter button the camera should work.

darn car wont start

How the hell do you get the backing off the shutter foam. I have literally rebuilt engines and I can't get this to come off with out ripping

I have two of these cameras. I'll be surprised if I don't need to do this to one or both of them. I like shooting the K-1000... or any camera for that matter!!

It seems to me, by the volume of comments from others about other cameras from the Minolta SRT line, that this is a common problem and you have saved a lot of people a lot of grief because of this great video. Thank you for taking the time to make this video.

I believe the flash on one of these cameras will only Power up if you pop the flash up put on a camera that's working properly. This is a fully automatic flash so it won't pop up if there's a lot of light but you can trick it by covering the lens and half pressing the shutter when does long as the flash popped up it should fire.

That lefover foam was for the fuzzy part

What screwdriver did you use to take off the screw at 18:40?

This improved my camera a bit; went from stuck curtain to stuck mirror. Then I realized teeth on the yellow round thing were broken off. But many thanks for this video as it was extremely interesting investigating a mechanical problem :-)

Thanks I appreciate your video a lot, really helpful.

It got slightly better for me but shutter speeds from 30 and below the mirror doesn't return back down. Any suggestions?

Can you use vegetable oil?

Is this why I cant see anything thru my viewfinder?

It wasn't the issue I had but it helped me understanding how it should operate. My problem was solved by loosening the screw between the tripod mount and the lens mount a little. It made the springloaded arm return to its position. Thanks for uploading!

excelente , gracias por tu tiempo

just did this with my srt 201 that had a stuck curtain. fixed it up and it's great now, thanks so much for posting this!!!

these camera's seem unreliable as fuck i bought one that seemed in perfectly working condition for a bit too much money and it crapped out on me after a single roll of film i dont get the hype for these unreliable boxes, caused nothing but frustration and shit photos on my trip to vietnam

Hi, I have the exact same problem with my srt303b. It only started having this problem today, and my question is if the film that i shot today will be ruined because of this?

Thanks for sharing, there aren't many images of the bottom circulating around. This helped me repair a similar issue on my SRT101B

You have no power!! Insert really NEW powerful batteries! Try clean the contacts of batteries!

Unfortunately this didn’t work for my minolta 😩

Hello. Can you describe how the mirrors are placed inside the glass prism (pentamirror)and how it works.. and what kind of mirrors are used... I like the mirror prism (pentamirror)very much. Thanks

hey man, did you fix it? found a way for it to work? cheers!

thanks for this. I purchased the 120 version for self assembly and annoyingly they only have an assembly video for the 35mm version which is a little outdated now.

Aha! I have an SRT-202 and a 102 with the exact same issue! You have saved me from using the arcwelder! 🙂 Thank you!

Hello. My fujica stx-1 has a lever that seems disconnected from the column that holds the tip of the film. Also, the button to take the photo is stuck, but isn't when I pull the latency lever in the front. Do you know how I can fix it? I'm fairly new to it.

Valuable ! ! Regards

Ignore all that, this camera is beyond my skills to fix or it is too far gone. Back in the bin it goes. Maybe someday it will return.

My mirror is stuck up and wont come down even when cocking the camera, I was wondering would a dead battery cause this? or does the mirror not need that battery to work?

I had the same problem and watching this video made me frustrated because you where touching everything except for the part that controls the shutter button. If you go a little more down from where the button is, there is a switch that is locked. You have to press it down and the camera will reset itself.

Dude thank you!!!!!!!!!! This works well with the Pentax MX

Thanks for this video, waiting for the 2nd part. I've made a measur and i'm not sur about what it shows : 6 at 2000 U A. 6 µ ?

Thanks for this video! I hope it will work on mine!

please do 2nd part of this! I'm having exactly the same problem 🙏

Thanks for the tutorial - maybe just beginner luck but I managed to get the mirror dampener in place without wetting it just using my fingers.

This is one of the easiest, most pleasant and interesting tutorials I think I have ever seen.I have a pentax K1000 and a Canon AV1 which both need shutter foams.This video is the best.So clear and calm explanations and thank you for the link to the parts.Thankyou so much from NZ where we can't get anything.🙂

hello! thanks for this video. great work! where can i see part two please?

Thank you, the Dora Goodman video didn't show the 120 version at all and this helped me out on the parts I didn't understand. My parts fit a little bit better than yours, so maybe they have better quality control now.

This was helpful, restoring a k1000 that was given to me. First film camera!

How to build this macine?

Seems like a lot of work. Is there a motorized one available?

oddly satisfying

Billy working on his time travel machine

I want to do this! This will help me in my project, thank u :)

Nice! Thanks for sharing! What software do you use for slicing the STL model?

no it cannot because the handle's movement is not a circular motion, it is elliptical.

I also cannot enter the site...interesting video though...